Chrysler Neon P0441: EVAP System – Incorrect Purge Flow

P0441 is one of the more common OBD-II trouble codes with the Chrysler Neon. It’s a generic powertrain code, which means regardless of what auto manufacturer built the vehicle, it’ll have the same meaning. P0441 indicates that there is an issue with the Evaporative Emissions System. It’ll often appear with P0455.

 

Chrysler Neon P0441 Diagnosis

 

The Neon’s ECM will trigger this code when it detects that the vacuum level in the Purge System is not within the proper specifications. P0441 can cause the vehicle to fail an emissions test.

 

Chrysler Neon P0441 Symptoms

P0441 Chrysler Neon

Often, the only symptom of P0441 will be the service engine soon light itself. In a few cases there may be other symptoms. Here they are:

  • Check Engine Light– Often, this is the only indication of a problem.
  • Fuel Odor– The EVAP system deals with fuel vapor. Often when there is a problem with it there will be a gas odor, since the fuel vapor has somewhere to go other than the intake manifold. It’s usually most noticeable when fueling up.
  • Drivability Issues– In only the rarest of occasions, a Neon may stall or have an issue with the idle speed.

Neon P0441 Causes

Chrysler Neon P0441 Diagnosis

Here are some of the most common causes of the P0441 code. They are presented (somewhat) in order from most to least likely to be at fault.

  • EVAP Canister Purge Valve– The most common issue that causes the P0441 trouble code in your Chrysler Neon is going to be the vapor canister purge valve. When it goes bad, it typically causes issues with the vehicle’s idle speed. This is especially true right after you fuel up. It’s really easy to replace. There are a few clips that you need to find and remove. This is often the problem. They are really cheap on Amazon too. Always make sure to verify the fit for your vehicle. There’s a tool to check the fit right there.
  • Faulty Purge Control Solenoid– There is a solenoid that controls the operation of the Purge Valve. When it fails, the purge valve will no longer be able to operate properly. When this happens P0441 will almost always throw.
  • Bad Vacuum Line– If the vacuum line going to the purge canister has failed, that’ll cause the P0441 code to show up for sure. This is worth taking a look at especially if you live in a drier climate. Vacuum leaks are pretty easy to detect as well. Here’s a good article on how to find them from Popular Mechanics.
  • Gas Cap– The gas cap going bad can cause P0441. This is due to the fuel tank not having the right amount of pressure with a bad cap. If you are getting a message to tighten your fuel cap when it is tightened already, you should replace the fuel cap before doing anything. They are afChryslerable, and easy to replace.
  • Wiring Issue to the Purge Solenoid– Due to the location of the purge solenoid, it is not uncommon for the wiring going to it to fail. Here’s a great article from Backyard Mechanic that explains how to detect a short circuit, if you think this may be the cause. https://www.backyardmechanic.org/how-to-find-a-electrical-short-on-most-any-vehicle/.

Conclusion

It’s usually safe to drive your Chrysler Neon with P0441. We still recommend dealing with it as soon as possible, though. Good luck with fixing the issue. If you feel there is anything that you would like to add to this article, please feel free to leave a comment below. Good luck!