Toyota 4Runner P0420: Meaning, Causes, + How to Fix

This page is meant to help you troubleshoot the Toyota 4Runner P0420 trouble code. It covers the P0420 code’s meaning, symptoms, causes, and possible solutions.

P0420 is the most common OBDII code and is virtually never a breakdown risk.

A failing oxygen sensor or bad catalytic converter are the most common causes of P0420.

Table of Contents


Toyota 4Runner P0420 Quick Info Table

Toyota 4Runner P0420
DefinitionP0420: Catalyst System Efficiency Below Threshold
SymptomsUsually just the check engine light
Common CausesFailing O2 sensor or catalytic converter
Breakdown Risk?Rarely (it’s an emissions code)
Repair Cost (Parts)$250 or less
Repair DifficultyO2 sensor replacement is easy, but the catalytic converter can be a challenge

Toyota 4Runner P0420 OBDII Code Defined

P0420 is generic (has the same meaning for all vehicles made in 1996+) OBDII trouble code. Here’s the technical definition for your vehicle:

P0420: Catalyst System Efficiency Below Threshold (Bank 1)

Catalyst System Efficiency

Your 4Runner’s exhaust contains hydrocarbons, carbon monoxide, and other harmful gasses. Catalyst system efficiency is the percentage of these chemicals removed from the exhaust system. Oxygen sensors measure these pollutants.

Efficiency Below Threshold

P0420 Definition Toyota 4Runner
An upstream O2 sensor

When the readings from the upstream and downstream oxygen sensors show similar readings (not enough pollutants expelled from the exhaust), your vehicle will throw the service engine soon light (P0420).

These readings shouldn’t match since the catalytic converter is supposed to scrub the pollutants from the exhaust.

When the readings from each O2 sensor get close, the software in your 4Runner’s PCM believes that the catalytic converter is no longer doing its job. This can happen for three reasons:

  1. The exhaust is escaping before it is measured
  2. The catalytic converter is losing efficiency and needs to be replaced
  3. The O2 sensors are not reporting the right readings from the exhaust

Bank 1

You can ignore this section if your 4Runner has an inline engine or if the exhaust manifolds merge into one pipe before the catalytic converter.

Most vehicles only have one catalytic converter But, if your vehicle has dual exhaust, you’ll need to determine which side of the engine is the bank one side.

Bank one is the side of your 4Runner’s engine with the first cylinder. Typically, the first cylinder is closer to the front of the engine. A quick Google search for your vehicle’s engine and model year can quickly confirm that. The bank 2 version of this code is P0430.


Toyota 4Runner P0420 Code Symptoms

P0420 Symptoms

The P0420 code in a Toyota 4Runner will often be thrown if one of your vehicle’s oxygen sensors is not functioning correctly.

There are rarely drivability issues associated with P0420. For most people, the first sign that anything is wrong is the service engine soon light coming on.

Here are the typical symptoms that something is wrong when you have code P0420:

  • Service Engine Light– Often, this is the only symptom.
  • Rotten Smell– A rotten egg or sulfur smell is a telltale sign of a bad catalytic converter.

Related: P0442 Toyota 4Runner


P0420 Causes

P0420 Causes Diagnosis

Here are the most common causes of P0420 in the Toyota 4Runner:

Likely Causes

  • Bad catalytic converter
  • Bad O2 sensor

Other Causes

  • Exhaust leak
  • O2 sensor wiring
  • PCM issue
  • Overheating converter (usually caused by a misfiring engine, there should be codes)
  • Burning oil (overheats converter, usually no code)
  • Engine not heating up enough

P0420 Diagnosis: Toyota 4Runner

The most common fix for P0420 in the Toyota 4Runner is a new catalytic converter, followed by an O2 sensor replacement. Before taking your 4Runner into an exhaust shop for an (expensive) new catalytic converter, let’s ensure that’s what you need.

Here’s a good P0420 diagnostic order for the Toyota 4Runner:

1. Check for Other Codes

The first thing you want to do when trying to fix P0420 in the 4Runner is to verify there aren’t any other trouble codes. Three types of codes can give clues as to what’s going on with your vehicle.

Misfire Codes

If you have a misfire-related code (such as P030X, where X is the misfiring cylinder) or P0300 (random multiple misfiring), it can cause the catalytic converter to overheat, which decreases its efficiency and throws P0420.

Engine Temp Sensor Codes

If your 4Runner’s computer doesn’t know the engine temperature, it’ll keep the fuel mixture rich. When this happens, the exhaust the O2 sensors see will be out of range, and it could throw P0420. You should see P0128 along with this code.

O2 Sensor Codes

If your vehicle has any O2 sensor-related codes, jump to section three.

2. Exhaust Leak (Easy to Check)

It would be a good idea to check your vehicle for an exhaust leak first. You should be able to hear it easily when looking underneath your 4Runner.

An exhaust leak can cause P0420 since it causes exhaust gasses to escape unmetered.

If your vehicle doesn’t have an exhaust leak, you’ll need to test the O2 sensors and/or catalytic converter.

3. Test the Oxygen Sensors

Toyota 4Runner Bad Oxygen Sensor Symptoms
Typical Oxygen Sensor

Your Toyota 4Runner has at least two oxygen sensors, one before and one after the catalytic converter (commonly referred to as the upstream and downstream O2 sensors).

  • Upstream– The upstream (before the exhaust gas hits the catalytic converter) oxygen sensor measures the exhaust gasses as they exit the engine. The Powertrain Control Module (PCM) uses this data to adjust the air-fuel ratio, ignition timing, and more.
  • Downstream– The downstream oxygen sensor’s (after the exhaust exits the catalytic converter) primary function is to verify the catalytic converter is doing its job.

Often, an oxygen sensor is the cause of P0420. When an oxygen sensor has failed, it can cause a false reading and trigger this code in your vehicle. You can test the sensor before replacing it. The videos below show you how to test one with a multimeter or professional scan tool.

How to Test an Oxygen or O2 Sensor (YouTube: Multimeter and Torch)
How to Check the O2 Sensors (YouTube: Scan Tool)

4. Inspect the O2 Sensor Wiring

P0420 Fix Toyota 4Runner

Over time, the oxygen sensor wiring can go bad. It is especially volatile since it is right next to the hot exhaust at all times. The downstream oxygen sensor wiring is also fragile since it is far from the ECM, and the catalytic converter can get hot (more distance to travel = more area to fail).

How to Test Wiring in Under an Hour (2 Car Pros)

5. Catalytic Converter (Most Common)

The catalytic converter is responsible for scrubbing out as much pollution as possible from your 4Runner’s exhaust.

Over time, it can lose its ability to strain pollutants out of the exhaust. Although modern catalytic converters are supposed to last the life of most vehicles, over time, they can lose their ability to strain pollutants out of the exhaust.

There could be some underlying problem if it has clogged, such as a misfire, an air/fuel mixture that is too rich, or oil getting into the cylinders. You can test your catalytic converter with a heat gun to see if it’s overheating (see how in the video linked below).

How to Test Your Catalytic Converter in 15 minutes (YouTube)


Conclusion

If there are no codes other than P0420 present, and the O2 sensors are recording data properly, it’s likely your Toyota 4Runner’s catalytic converter has failed, which is what this code is reporting.