Jeep Renegade P0401: Meaning, Causes, How to Fix

P0401 is a very common OBDII trouble code that’ll pop up in the Jeep Renegade. It has to do with the emissions system and stands for Exhaust Gas Recirculation (EGR)→ Insufficient Flow.

The EGR system in your vehicle is responsible for recirculating exhaust gasses in order to lower the vehicle’s emissions output. There are three main parts of the Renegade’s EGR system. 

  • EGR Valve
  • Differential Pressure Sensor
  • Actuator Solenoid

Jeep Renegade P0401 Quick Info

Jeep Renegade P0401
DefinitionJeep Renegade P0234: Exhaust Gas Recirculation (EGR)→ Insufficient Flow
Common CausesBad EGR Valve, EGR Tube, Faulty EGR Sensor
SymptomsCheck Engine Light, Piston Slap
Repair Difficulty?Moderate
Breakdown Risk?Not Usually
Repair Cost (Parts)Around $100 or less

Jeep Renegade P0401 Meaning

Exhaust Gas Recirculation (EGR)→ Insufficient Flow.

Exhaust Gas Recirculation (EGR)

The EGR system takes exhaust gasses and cycles them through the combustion chamber a second time.  This process reduces tailpipe emissions.

Insufficient Flow

The flow of exhaust through the EGR system is too slow.  P0401 will not affect the way your Renegade runs.

Related: P0420 Jeep Renegade


Jeep Renegade P0401 Symptoms

Most of the time, there will not be symptoms associated with P0401 in the Jeep Renegade. There may be a slight ping or knocking sound on rare occasions.

  • Service Engine Soon Light– P0401 will illuminate the service engine soon light.
  • Knocking Sound– In very rare cases, a noticeable knock may come from the vehicle.
Jeep Renegade P0401 Diagnosis

P0401 Causes: Jeep Renegade

Diagnosing what is causing the P0401 code in the Renegade is typically not very tricky. Here are the most common causes:

  • Blocked EGR Tube– The tube that carries the exhaust gases back to the motor may clog up over time. Alternatively, it can become bent or kinked. This is especially true if you are experiencing P0401 right after doing some engine work. Check the tube and see if it is cracked, clogged, or damaged.
  • Faulty EGR Valve– The EGR valve is usually not the place to start.
  • Vacuum Issues– The EGR valve relies on the engine vacuum to recirculate exhaust gas. So, if you are encountering P0401 and other codes, the P0401 may be a symptom of larger problems. For instance, if the motor is not running well enough to create a sufficient vacuum to operate the EGR system, P0401 will often be thrown.
  • Sensor Issue– The Differential Pressure Feedback- EGR sensor can go faulty and cause the EGR valve to stop operating properly and throw the code.

P0401 Fix

The good news with P0401 in the Jeep Renegade is that it rarely ever costs much money to fix, and it is usually pretty easy to get the problem since it is right on top of the engine. 

Most folks see P0401 Insufficient EGR flow, look up the price of an EGR valve, see how cheap it is, and just throw a new one on.  That can be a mistake. The EGR valve will not always be the cause of P0401. Here are some of the most common fixes to help clear the P0401:

Check the EGR Tube

It’s a good idea to check the tube going to the EGR.  A crimped, broken, or disconnected EGR tube is often the cause of P0401; easy to do, fast, and replacing it is very affordable. If it’s cracked, you’ll need to get a new one. If it’s clogged, you can get away with cleaning it and replacing it.

Check DPFE Sensor Voltage

If you are good with a voltage meter, test the DPFE sensor voltage. Here’s a good article on how to do that from It Still Runs: How to Test DPFE Sensor.

Test the EGR Valve

A vacuum gauge will help determine if the EGR valve has gone bad. Here’s an article from Autozone on how to test it with a vacuum gauge.


Conclusion

Testing your EGR system is relatively easy to do. The most challenging aspect is the DPFE sensor. 

One by one, you can eliminate the DPFE sensor and EGR tubing.  At that point, it’s likely you’ll have to replace the EGR valve.